Datavideo SE-2000, Instruction Manual

Page: 12 / 40

12
6. HD- SDI OUT
4:2:2 SDI Video data supports SMPTE 292M standard at 1.5G Mbps.
SDI transfers professional level video signals and it’s can connect to
long distance transmission systems.
7. HD- YUV OUT
HD- YUV component analogue output connectors.
8. MULTI PREVIEW OUT
DVI-D digital signal preview output connector (PVW).
9. DC IN
DC in socket connect the supplied 12V 5A PSU to this socket. The
connection can be secured by screwing the outer fastening ring of the
DC In plug to the socket.
10. POWER
Switches the power On / Off.
11. AUDIO OUT
Supports two channels XLR Balanced Audio output.
12. AUDIO IN
The SE-2000 supports four XLR Balanced Audio Input channels.
There are two kinds of switches under
AUDIO IN:
The
LINE/MIC
switch is used to set the audio as LINE in or MIC in.
The
48V ON/OFF
switch is for phantom power. If you want to use MIC
in, please set the
LINE/MIC
switch first, and then if using a Condenser
microphone turn ON the
48V ON/OFF
switch. If you wish to use a
Dynamic microphone please turn OFF the
48V ON/OFF
switch.