Datavideo NVS-34, Instruction Manual

Page: 32 / 64

32
CG Type
You may select to place a text (Text) or graphic (Picture) CG object on your video
from the drop-down menu.
Text
After setting the CG type to Text , you will be allowed to enter the text that you want
to place on the video.
Enter CG text in the Text field and CG text font size in the Text Size field.
Picture
If you set the CG Type to Picture , you will be required to select a picture file from
your local hard disk. Click Browse to browse the hard drive for your graphic CG file.
Location-X
Enter the x-coordinate that determines the horizontal location of the CG object
overlaid.
Location-Y
Enter the y-coordinate that determines the vertical location of the CG object overlaid.
Foreground Color
You may either enter the RGB values or select a color from the color spectrum to set
the foreground color. Then fine tune the selected color by dragging the circle cursor
on the palette. Click the color wheel button at the bottom right corner to confirm
the selection.