Datavideo NVS-30, Instruction Manual, Page: 9 / 59

9
Chapter 2 Connections and Controls
2.1 Front Panel
Stream and Recording
Stream Button
Press this button to activate the RTMP stream and
press again to stop streaming.
The Stream button is disabled when device is set to
Record-only mode.
For information on specifying your stream settings,
see “ Stream Settings ” in Chapter 4.
Note: Pressing the Stream button starts the stream
for that device only. If you want to control multiple
devices, you must use the control buttons on the
Control page of the Command Center to start and
stop streaming multiple NVS-30 devices on the
network at the same time (see Chapter 5,
“ Streaming and Recording ”).
Stream LED
Indicates the device streaming status (see Appendix
1
, “ Status LEDs ”).