40
set bit rates and destinations by managing a web page instead of logging into the
Command Center.
1. Go to the
Automatic configuration
page of the Command Center.
2.
In the
Load settings from a web page URL
field, type the URL address of a page
hosting the configuration parameters.
3. Click
Load
.
4. (Optional) Check
Load settings at device reboot
checkbox
if you want to have your
NVS-30 automatically load the settings from the specified URL the next time it boots
up.
Your settings will now match those of the chosen configuration file.
Note: With the Load settings at device reboot checkbox checked, you only need to
reboot/reset your NVS-30 and it checks the specified URL for updated settings.
Generating a configuration file
You can export your current settings as an NVS-30 configuration file, which you can
then save to your computer, to a USB device connected to your computer, or to a
network drive. You can then use the configuration file to configure other NVS-30
devices.
Note: You cannot save to a USB device connected to the NVS-30.
1. Go to the
Automatic configuration
page of the Command Center.
2. Under
Export current settings to an NVS-30 configuration file
, click
Generate file
.
3. Select a save location. Do not change the filename (
NVS-30Settings.xml
) if you
plan to automatically configure an NVS-30 from a USB device (see the subsequent
subsection
“Automatically importing NVS-30 settings on factory reset”
).
4. The NVS-30 configuration file is created, and contains all the NVS-30 settings as
XML parameters.
Automatically importing NVS-30 settings on factory reset
On factory reset, the NVS-30 can automatically import configuration settings from an
NVS-30 configuration file that is on a USB device connected to NVS-30’s USB port 2.
1.
Copy the NVS-30 configuration file to a USB device.
Note: The configuration file must have the original filename, given by the NVS-30
when the file was generated (
NVS-30Settings.xml
).
2. Connect the USB device to the NVS-30's USB port 2.
3.
Perform a factory reset by pressing and holding the Reset button for at least five
seconds.
