H.264 Network Video Streaming Server
NVS-20
Setting > Restore default
There are several settings that can be used within the NVS-20 and from time
to time you may wish to restore the out of the factory default settings.
NOTE:
This feature will also reset the NVS-20 login details to the default user
name and password shown on page 22.
1. Log in with the NVS-20 server as normal using the computer web browser.
2. Click
Setting
then
Restore Default
.
3. Click
the
Restore to Default
button to confirm that you wish to proceed.
4. Once the unit has restarted login with the default user name and
password shown on page 22.
The factory default streaming settings should then be set as:
Stream Server
: OFF
Input Source
: HDMI
Resolution
: 1920 x 1080
Framerate
: 50 fps
Brightness
: 128
Contrast
: 128
Hue
: 128
Saturation
: 128
Sharpness
: 128
H.264 Level
: 3.1
H.264 Profile
: Main
Audio Stereo
: Stereo
Audio Bitrate
: 384 Kbps
Video Bitrate
: 3000 Kbps
Video Rate Mode
: VBR
Audio Source
: DIG
Analog Audio System
: EBU
Restore Factory default via mode button
The NVS-20 can also be restored to the factory defaults from the front panel.
From power off.
Press and hold in the mode button and turn on the NVS-20
power; keep holding the mode button for
40
seconds. When released the
NVS-20 will take a further 30 seconds to finish the boot up process.
Remember to login with the default username and password as shown on
page 22.
23
