21
Connecting to a PC
NB: Although a PC may see the HDR-100 as an AVC compliant DV Device it is not intended to be operated as
such.
If your PC sees an AVC DV Device select Take No Action.
Connect the HDR-100 IEEE-1394 output to a PC.
To set the HDR-100 into HDD Mode firstly press the Menu button so that it is illuminated.
You will see the display change to the HDD Mode Menu
Press the Next (
▲
) Button(right) to select ENTER and the display will show the HDD Enable Confirmation
Screen
Press the Next (
▲
) Button(right) again to confirm, after a few seconds HDD Mode will be enabled
The PC should recognise that an external IEEE-1394 (Firewire)HDD has been connected. Select Open
Folder to View Files. The drive should also appear in My Computer as an internal HDD. Once connected the
HDR-100 can be used just like any HDD. You can select the required files and drag and drop them to the
required destination.
To return the HDR-100 to Deck Mode use “Safely Remove Hardware”. You will find “Safely Remove
Hardware” on the Taskbar.
