Datavideo CG-100, User Manual

Page: 23 / 141

23
GPI Trigger
You can set GPI to trigger the Animation objects like wipe, push,
fade etc in CG-100.
Follow the steps below to set “GPI trigger”
Step1 Set “ Wait until keyboard” for the “Prior_Wait” and
“Post_Wait” of all animation objects. Please note that between 2
animation objects, you do not have to set double “Wait until
keyboard”. For example, Animation A is set “ Wait” for the
“Post_Wait”. If its follower: Animation B is also set to “ Wait” for the
Prior_Wait”, there will be 2 “Wait” in between. The user would
have to send 2 GPI triggers to continue the motion. It is not a good
setting and it tends to confuse the operator. Just remove one
“Wait” and set “0 second” instead.