123
Use Crawl-A to output the first Crawl.
Select its dummy #1 or #2. If you want to crawl from left to right,
you have to quit this program and re-enter CG-100, go to
“Setup” and tick
Click
to open an editing box, type the
message in the box. The maximum length is 500 English letters
or ANSI characters.
Click
to go back to CG-100 layout editing mode and
change the color and size of the dummy on the sample page as
you would normally in the CG-100.
Click
to go back to CG-100 layout editing mode. Set the
position of the crawl by adding an “animation box” in the sample
page. To add an animation box, click
to create a display
box and resize it and put it to the right place, again as you
normally do in the CG-100.
Click
to adjust the speed of the crawl. There are 16
types of speed. Type 1 is the lowest and type 16 is the fastest.
Click
to set the times of loop. L=0 means forever.
Click
to set how many seconds delay between the
crawl sequences.
Summary of Contents for CG-100
