Datavideo CG-100, User Manual

Page: 137 / 141

137
CG-100 registration
Go on line www.datavideo.info/product_reg.htm for product
registration and activation
Software Protection
(A). While installing CG-100 software, the default setting for serial
number is set as “DEMO”. If you press <Enter> directly at the time
of installation, it will install this software as a demo version. Type in
the correct serial number, it will complete the installation.
Otherwise, it will exit the installation window.
(B). In “DEMO” version, video will be showing Datavideo and
CG-100 trademark all the time.
(C). Use and install the correct serial number, it will ask you to
activate the software via the internet after the installation is
completed.
If not, 7 days after the software is started, it will show Datavideo
and CG-100 trademark on the video.
(D). When "the software is started", it will read the information of
the computer hardware with the serial number and send it to our
web site. Our web site will reply with a "password" to your
computer. This computer can use CG-100 software normally after
this. The password contains the information of the serial number
and the computer hardware ID. It cannot be moved to other
computers.
(E). The website will record the serial number with that computer
hardware information. If this computer is infected by a virus, or has
to be repaired due to malfunction, the user can reinstall and
activate CG-100 software again since the hardware information is
the same.