Datavideo BC-50, Instruction Manual

Page: 13 / 112

13
3G-SDI Output Video output(Type A)
connected to SDI port of
the monitor.
RS-485 Control
Port Control port using the RS-
485 control protocol. The
max. distance is 1200m
12V DC Power IN DC in socket connects the
supplied 12V PSU. The
connection can be secured
by screwing the outer
fastening ring of the DC In
plug to the socket.
Power LED
Indicator The power LED keeps
flashing when the camera
is powered on.
Tally Signal Port This tally LED is used to
receive the tally signal by
the 3.5mm wire from the
tally box connected to the
switcher. If the switcher
transmits a PGM signal to
the camera, the tally LED
will light on in red.
However, if the camera
receives a PVW signal from
the switcher, the tally LED
will light on in green.