InstallatIon and operatIon 7
2. INSTALLATION AND OPERATION
BEFORE USING YOUR WATCHPAX 40
please read the manual thoroughly before operation. always check that the unit has not been dam-
aged in transit when you take delivery.
IMportant: the WatCHpaX 40 is a plug-and-play unit. do not open, modify or repair the unit your-
self. opening, modifying (software or hardware) or repairing the unit yourself willl invalidate the war-
ranty and presents a risk for the user.
SAFETY FIRST
This product must be grounded. Ensure you connect the power plug to a grounded power socket.
•
Insert the power plug all the way in, so it is not loose.
•
do not place the power cord or product near heat sources.
•
do not suspend the unit using the strap handle and do not use the strap as an anchor point.
•
Caution: shock hazard if handled carelessly or inaccurately.
•
do not remove cover. refer all servicing to dataton. the unit shall be connected to a grounded
outlet.
•
do not use a damaged power cord or plug.
•
do not touch the power plug with wet hands.
•
do not install the product in a narrow space and/or where there is bad ventilation. do not block the
ventilation in any way when operated. always keep front and back of unit clear, minimum 200 mm.
•
always keep plastic packaging away from children.
•
do not install the product on an unstable or vibrating surface.
•
Install the unit in a clean, dry area without excessive particles or dust, in the air (preferably in an
air-conditioned server room). do not install the product in a place where it is exposed to high tem-
perature, chemicals, dust, moisture, oil or smoke as this may seriously affect its performance and
lifetime.
•
take care not to drop the product when moving it.
•
When installing the product on a shelf, ensure the bottom edge of the product does not protrude to
avoid tipping, for example.
•
to move the product, first disconnect all the cables from it.
•
the wall socket should be easily accessible for pluggable equipment.
•
High voltage runs through the product. do not attempt to disassemble, repair, or modify the product on
your own. to move the product, first disconnect all the cables from it.
•
If the product generates a burning smell, or smoke, remove the power cords immediately and contact
dataton.
•
If the product falls, or the exterior is damaged, power off the product, remove the power cords and
contact dataton.
•
If there is a risk of thunderstorm or lightning strike, turn off the power and disconnect all cables.
