DATASONICS SIS-1500, System Manual

Page: 59 / 110

SIS-1500 Seafloor Imaging System 3-23
SECTION 3 Setup and Deployment System Startup
6. Type -10.00 and 10.00 into the Pitch & Roll Min and Max text boxes,
respectively.
7. Type 0.00 and 360.00 into the Heading & Course Min and Max text
boxes, respectively.
8. Click OK to close the Attitude dialog box and save any changes, or click
Cancel to close the dialog box without saving any changes.
Saving Setup Configurations
Once the parameter settings have been configured, they can be saved to a
file. Hence if the settings are changed, they can be easily recalled by loading
the saved setup configuration.
To save a setup configuration:
1. Select File from the menu bar, and then choose Setup. The Setup dialog
box shown in Figure 3-8 on page 3-19 opens.
2. Configure the navigation, sonar, and display parameter settings as
instructed in Parameter Settings beginning on page 3-18, and then click
Save in the Setup dialog box. The Save As dialog box shown in
Figure 3-12 opens.
Figure 3-12 The Save As Dialog Box
3. Type the name of the file to save to in the File name text box and click
Save to save the file and close the Save As dialog box. It is not
necessary to type the file extension.
4. Repeat Steps 2 through 4 for as many setup configurations as desired.