DATASONICS SIS-1500, System Manual

Page: 58 / 110

3-22 DATASONICS
Volume I System Manual June 1998
Configuring the Display Parameter Settings
The display parameter settings should be verified or reconfigured in
accordance with the standard and optional sensors installed; however, they
can be changed at any time. When running Chirpscan
3
for the first time, the
display parameter settings are set to display sidescan sonar data and data
from all the standard sensors. The displays include Port Sidescan and
Starboard Sidescan, Pitch and Roll, Heading and Course, and Altitude.
To verify or reconfigure the display setup parameters for all the standard
sensors:
1. Select File from the menu bar, and then choose Setup. The Setup dialog
box shown in Figure 3-8 on page 3-19 opens.
2. Click the SS, Bottom Track, PR, and HC data windows to turn them on.
3. In the Setup dialog box Click OK to close the Setup dialog box and save
the settings as the default settings, or click Cancel to close the dialog box
without saving the settings as the default settings.
4. Select Data Window from the menu bar, and then choose Attitude. The
Attitude dialog box shown in Figure 3-11 opens.
5. Select the Pitch & Roll and Heading & Compass check boxes.
Figure 3-11 The Attitude Dialog Box