background image

 

Operation Manual, RA2400 & RA7300 Power Amplifiers 

 

Page 3 

 

Document # 9301H62800 Ver. 1.00 

SAFETY INSTRUCTIONS 

Read all the safety and operating instructions before connecting or using the RA2400/RA7300. 

ƒ

 

All warnings on the unit and in this operating manual should be adhered to. 

ƒ

 

All operating and use instructions should be followed. 

ƒ

 

Do not place/use the unit near water; for example, near a bathtub, washbowl/sink, laundry 

tub, decorative water features (waterfalls/fountains), in a wet basement or near a swimming 

pool. 

ƒ

 

This unit is not intended for outdoor use. 

ƒ

 

This unit should be installed so that its location or position does not interfere with its proper 

ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that 

may block its ventilation openings.  It should also not be placed in a built-in enclosure, such as 

bookcase or cabinet, that may impede the flow of air through its ventilation openings. 

ƒ

 

The unit should be situated away from heat sources such as radiators, fireplaces, hot air ducts, 

heat registers, stoves and/or other devices (including amplifiers) that produce heat. 

ƒ

 

The unit should be connected to a power-supply outlet only of the voltage and frequency 

marked on its rear panel. 

ƒ

 

The  AC  power  cord  should  be  routed  so  that  it  is  not  likely  to  be  walked  on  or  pinched, 

especially near the plug, convenience receptacles or where the cord exits from the unit. 

ƒ

 

Clean unit only as recommended in this instruction manual. 

ƒ

 

The unit’s AC power cord should be unplugged from the wall outlet when the unit is to be 

unused for a long period of time. 

ƒ

 

Care should be taken so that objects do not fall, and liquids are not spilled, into the unit 

through any openings. 

ƒ

 

The unit should be serviced by qualified service personnel when: 

a.

 

The power cord or plug has been damaged; or 

b.

 

Objects have fallen, or liquid has been spilled, into the unit; or 

c.

 

The unit has been exposed to rain or liquids of any kind; or 

d.

 

The unit does not appear to operate normally or exhibits a marked change in 

performance; or 

e.

 

The device has been dropped or the enclosure damaged. 

ƒ

 

To prevent electric shock, do not use a ground lift plug/adapter.  Also, do not use the polarized 

plug with an extension cord, receptacle or other outlet unless all the blades can be fully 

inserted to prevent blade exposure. 

Summary of Contents for RA2400

























Reviews: