Datasat DDR-16 AES67, Installation And Operating Manual

Page: 21 / 24

DDR-16/32 Installation and Operating Guide Version 0.91
Appendix C. AP25 AES67 Out Card (H790) Setup C-2 Document #: 9301H85300 Ver. 0.91
Ethernet Link
This section displays:
Ethernet link status (up, down)
Current IP address of the AP25
Select the Configure button to bring up the AES67 Network configuration screen.
Figure 3 – Network Configuration Screen
DHCP is the default selection. To enter a Static IP address, select the Static checkbox. This will
bring up the screen shown in
Figure 4
. Tapping in the gray boxes will bring up a virtual
keyboard allowing the address, mask and gateway to be entered. To activate changes, the Reset
AES67 button must be selected.
Figure 4 – Static IP Configuration Screen
PTP (Precision Time Protocol)
This section displays:
PTP status. The example screen in
Figure 2
shows that this device is currently the Master.
PTP Grand Master ID
PTP Current offset
Select the Configure button to bring up the AES67 PTP configuration screen.