Revision No. 005 August 2020
DataRemote 2020
Deliverables
1.
Signed work order.
2.
Signed tech installation checklist.
3.
Required photos.
1)
Photo of the DataRemote DRI-9080 device with battery switch in "On" position.
2)
Photo of RSSI LED of the DataRemote DRI-9080 device for signal strength
indication.
3)
Wide angle photo of room where Fire Alarm Panel resides.
4)
Photo of Fire Panel outside cover.
5)
Photo of Fire Panel's status upon arrival
– controller display / any fault LED's.
6)
Inside door view of Fire Alarm Panel
– any labels or block diagrams.
7)
Photo of inside of Fire Panel
– motherboard.
8)
Photo of old POTS line's surface mount jacks at Fire Alarm Panel.
9)
Photo of Old POTS line's terminations at telco closet/demarc/SNI.
10)
Photo of cable test results of newly installed SMT boxes (as applicable).
11)
Photo of SMT boxes labeled with new T's & prim/sec suffixes.
12)
Photo of marked phone cords plugged into the DataRemote DRI-
9080 device’s 1-8
ports.
13)
Photo of Fire Panel's controller display before cut-over to the DataRemote DRI-
9080 device’s ports.
14)
Photo of all cable management.
15)
Wide angle photo of entire wall & the DataRemote DRI-9080 device closeup to
show completed installation job.
4.
Picture/scan of both pages of Tech Checklist.
5.
Picture/scan of Customer signed Work Order.
NON-Alarm installation tasks:
For all other device installations follow same steps excluding RJ-
31 biscuit connections and monitoring company communications.
NOTE: The DataRemote DRI-9080 device LED FX lights run left -to-right (1 -8)
Advanced Programming Information.
▪
For advanced programming information, please go to
Support.Dataremote.com.
This
is the main support desk site for submitting Tier 3 trouble tickets.
▪
Please set up an account by requesting access to "Advanced Programming
Information Guides" and entering your email contact details.
▪
You will receive an email asking you to login and set up an account.
▪
You will then receive a second email with a link with the login to your support desk.
▪
The customer support wiki knowledge base contains documentation for Advanced
Programming of the DRI-9080 device as well instructions on how to submit and check
on Tier 3 support request ticket.
Page 20
