10
2.3 How to Install the EzBackup™sa Software – Linux®
1.
Insert the
EzBackup™sa
Installation, Backup & Restore CD that came with your unit into
the CD-ROM drive. Go to the directory where the CD is mounted. Navigate to the
Linux®
directory of the CD and run the file
InstallEzBackup.
The install screen should appear.
2.
Click on
Install Now
to start the installation.
3.
Select
Yes
to the “
Install EzBackup™sa”
question.
4.
Step through the installation screens and make the appropriate selections based on your
preferences.
5.
Upon completion of the install, select
Exit Install
from the bottom right-hand portion of the
window.
6.
The
EzBackup™sa
software is now installed.
7. Leave the CD in the CD-ROM drive.
8.
Follow
Steps 2–7
from
section 3
to perform the
Full Image Backup
and to complete the
installation.
2.4 How to Install the EzBackup-sa Software – Mac
1
.
Turn your computer on to install the EzBackup™sa application.
If your computer is
already on, close down all applications.
2. Connect your new EzBackup™sa to your computer
. Connect the USB or Firewire cable
to the unit and to an available USB or Firewire port on your computer. Connect the power
supply connector to the 12V socket on the unit and plug the wall mounted power supply into
a wall outlet. Turn on the
EzBackup™sa
and also turn on the internal fan of the
EzBackup™sa
, as well. If an error message pops up reading “The disk you inserted was
not readable”, click on ignore.
3. Insert the EzBackup™sa Installation, Backup & Restore CD that came with your unit
into the CD-ROM drive.
Browse CD inside Mac OS X directory, and double click on install
package. Be sure to install onto your primary internal drive.
Upon completion of the
software installation, leave the EzBackup™sa Installation CD in the CD-ROM drive.
4.
Exit all applications and restart your computer with the CD still in the CD-ROM drive.
5.
Press and hold “C” button to boot from CD, as the system begins to boot.
