Zirrus, LLC ©2015
6300-CX User’s Guide
27 of
28
FAQs
How do I factory reset the DataPro2Go 6300-CX?
1.
Ensure that the device has been powered on for at least 30 seconds.
2.
Briefly press the Erase button located on the back of the device.
What IP address does the DataPro2Go 6300-CX use?
By default, the DataPro2Go 6300-CX will use 192.168.210.1. You can access the device through
its WAN Ethernet port using this IP address.
What size SIM card does the DataPro2Go 6300-CX use?
The DataPro2Go 6300-CX supports standard mini-SIMs (2FF).
How do I insert a SIM into the DataPro2Go 6300-CX?
With the power disconnected, the SIM card should be inserted notch-end first with the gold contacts face down. The
SIM slot is located on the back of the DataPro2go 6300-CX between the power connector and the USB port. The SIM
will click into place when fully inserted.
Does the DataPro2Go 6300-CX fail back to 3G?
Yes, if the DataPro2Go 6300-CX doesn’t recognize a 4G/LTE network available, the device will automatically fallback to the
highest available 3G network. Supported networks include DC-HSPA+, HSPA+, HSPA, EDGE, GPRS, GSM and CDMA.
Does the DataPro2Go 6300-CX support IPv6?
Yes. In passthrough mode, when the 6300-CX receives an IPv6 prefix from the cellular network, it uses SLAAC to pass
the prefix to the client device connected to its Ethernet port. The 6300-CX will also pass the IPv6 DNS server using the
SLAAC RDNSS option and stateless DHCPv6.
DATA2GOWIRELESS.COM