Zirrus, LLC
©2015
6300-CX User’s Guide
21 of
28
Managing Device Locally
The following DataProView actions are typically only performed by your network administrator. Note: Using
DataProView
to centrally manage your device is recommended. If you are not using DataProView, you must manage
and configure your device using the local interface.
Connecting to the Device
Communication with the device is typically via its Ethernet port. By default, you can connect to the device via its
Ethernet port, at the IP address 192.168.210.1. You can access the device via this default IP address using a PC
connected to its Ethernet port.
When connected to your site network, your DataPro2Go 6300-CX will attempt to use DHCP to establish a connection
and obtain an IP address. If a DHCP server is operating on the site network then the device will receive an IP address
configuration from the local network. You can also access the device using the IP address provided in the DHCP connection.
DATA2GOWIRELESS.COM