Zirrus, LLC ©2015
6300-CX User’s Guide
19 of
28
Establishing WAN connectivity via Ethernet Port
In order to provide a cellular connection to client devices, the DataPro2Go 6300-CX can be configured either in the
default Passthrough (i.e. bridge) mode or DHCP Server/Router mode.
Passthrough/Bridge Mode
In this default mode, the device operates as a transparent bridge and all traffic on all ports is passed directly to and
from the client device connected to the device’s Ethernet port. In Passthrough mode, a single IP address will be
available through the device’s Ethernet port. Only one client device can be connected to the
DataPro2Go
6300-CX
through its Ethernet port at a time.
1.
Login to DataProView and use the Search tool to find the device by searching for its MAC address.
2.
Select the MAC address of the device to bring up its details page.
3.
Select the View Configuration link in the Configuration section of the page.
4.
Once viewing the configuration profile, select the Edit pencil icon at the top right of the page.
5.
Under the
Modem
section of the configuration, open the Passthrough section and set the
following options inside that section:
a.
Check
Enable
.
b.
Change
Device
to
LAN
.
c.
Change
Zone
to
Internal
.
6.
Change the
Interface Type
under the
LAN
network section
from
DHCP
to
Static IP Address
.
7.
In the
Address
, enter in the IP address you wish to assign
to the device for its LAN DHCP network (i.e. the
gateway IP for the DHCP network).
8.
Open the
DHCP Server
section and select
Disable
.
9.
Click
Save
to apply the configuration changes.
Internet
Cellular Gateway
Cellular IP
Sample Diagram showing Passthrough Mode
6300-CX
Client Router
or Gateway
Ethernet
DATA2GOWIRELESS.COM