CiB
‐
9224
V12
User
Manual
21
2.3 Power Supplies
CiB-9224 V12 offer two 1023W hot-swappable redundant power supplies. If one power supply fail, simply
replace the power supply module without powering off the system.
The location of power supplies on the system is shown below:
Figure 2-4 Power Supply Locations
Please follow the steps below before removing or installing the power supply modules.
Step 1:
Disconnect all necessary cables.
2.3.1
To remove the power supply
Pull up the handle.
Press the retaining clip on the right side of the power supply along the direction of the arrow.
At the same time, pull out the power supply. (The power supply takes considerable force to remove.)
Figure 2-5
Removing the Power Supply
