CiB
‐
9224
V12
User
Manual
19
2 Hardware Operations
This chapter provides hardware setup and replacement procedures.
The components shown in this chapter are mainly for your reference. Please take the
actual shipment as standard.
2.1 Before You Start
Take note of the following procedures before you install or remove any internal components.
To reduce the risk of injury from electric shock, unplug all power from the systems.
Turning off the systems does not means is fully power off. Internal circuitry may remain
Active. Disconnect all power cords from the system to completely power off the system.
2.2 Chassis Cover
The system is a 2U form factor. Designed for compo n e n ts m a i n t e na n c e ease.
Reminder
Before you remove or install the chassis cover, please follow the step below:
Step 1: Make sure the system is off and disconnected from a power source.
2.2.1
To remove the chassis cover
Release the screw on the chassis cover.
Press the button along the direction of the arrow.
Simultaneously slide the cover horizontally to the back and remove it.
Figure 2-1
Removing the Chassis Cover
