CiB
‐
9224
V12
User
Manual
27
SAS I/O
Figure 2-16 SAS I/O Module Locations
Reminder
Before you remove or install the SAS I/O board, please follow the steps below
Step 1
：
Only replace one SAS I/O module at a time. Make sure at least on SAS I/O module to provide I/O
path to HDD/SSD
Step 2
：
Disconnect all necessary cables.
2.6.1
To remove the SAS I/O module
Pull the lever open.
Slide the SAS I/O module out of the chassis by using the lever.
Figure 2-17 Removing the SAS I/O module When
install the SAS I/O module:
Please mind fingers between the lock hinge and tray as it may cost injuries
