MODEL 1980 SERIES PRINTER
OPERATION AND MAINTENANCE
DataMetrics Corporation
20
4.5.1.3. Rear Paper-Guide Area
a. Open the rear access cover of the printer.
b. Open the rear paper guide/tray.
c. If the leading edge of the media has reached the output (top) area, pull the release
lever located on the fuser and pull the paper out the top. If the media has not reached
the top of the printer, pull the release lever and pull the paper out the back of the
printer.
d. Close and secure the hinged paper guide at the rear of the print engine.
e. Close and secure the top cover of the printer.
4.6. Shutdown
The printer enters standby mode when no data is being received from the host computer. It
is not necessary to power down the printer when the unit is not used for limited periods.
When the printer is to be taken out of service, perform the following shutdown sequence:
a. Ensure that the printer is not receiving data from the host computer.
b. Place the printer power switch in the “off” position.
