Datamax E-Class Mark III Professional+, Operator'S Manual

Page: 56 / 92

50 Chapter 4 – Menu System
DISPLAYED ITEM ITEM DESCRIPTION
WIRELESS ETHERNET Controls the communications settings for the wireless Ethernet network interface, where:
IP DISCOVERY Sets the address discovery method, where:
USE STATIC
ADDRESSES
The stored static IP, Subnet Mask, and / or Gateway Address will be used.
USE DHCP The card broadcasts over the network using DHCP protocol to receive addresses from the
responsible server at startup. Manual modifications to IP Address, Subnet Mask, or Gateway Address
are not allowed; and, if no server is found, the specified static value will be used. (Default Setting)

A server assigned IP address takes precedence over any static IP address
stored in the interface.
USE BOOTP The card broadcasts over the network using BOOTP protocol to receive addresses from the
responsible server at startup. Manual modifications to IP Address, Subnet Mask, or Gateway Address
are not allowed; and, if no server is found, the specified static value will be used. (Default Setting
)

A server assigned IP address takes precedence over any static IP address
stored in the interface.
STATIC IP
ADDRESS
Specifies the static IP Address of the interface in the standard octet format.
STATIC SUBNET
MASK
Specifies the static Subnet assigned to the interface, for example:255.255.255.000.
STATIC
GATEWAY
Specifies the Gateway Address the interface will use, for example:192.168.10.1
BLUETOOTH Controls the communications settings for the Bluetooth network interface, where:
DISCOVERABLE Yes/No; Determines whether other Bluetooth devices in range can detect the printer.
CONNECTABLE Yes/No; Determines whether other Bluetooth devices in range can connect to the printer.
BONDABLE Yes/No; Determines whether other Bluetooth devices in range can create a “bondable” connection
with the printer
AUTHENTICATION
REQUIRED
Yes/No; Determines whether passkey is required to the printer.
ENCRYPTION Yes/No; Determines whether encryption is used during data transfer to the printer.
INACTIVE
DISCONNECT
TIME
(0-65535 in seconds); Default: 60
Set the amount of time ( in seconds ) in which the current connection will remain open when no
activity is present.
POWER DOWN
TIME
(0-65535 in seconds); Default: 60
Set the amount of time ( in seconds ) in which the Bluetooth module will remain on when no activity
is present.
GENERAL NETWORK Controls general communication parameters, where:
SNMP ENABLE Sets SNMP
NO (Default Setting)
YES
TELNET ENABLE Enable/Disable Telnet protocol
NO (Default Setting)
YES
FTP SERVER
ENABLE
Enable/Disable FTP protocol
NO (Default Setting)
YES
HTTP SERVER
ENABLE
Enable/Disable FTP protocol
NO
YES (Default
Setting)
LPD PRINT
ENABLE
Enable/Disable LPD protocol
NO
YES (Default
Setting)
TCP PRINT
ENABLE
Enable/Disable TCP protocol
NO
YES (Default
Setting)
NETCENTER
ENABLE
Enable/Disable Netcenter compatibility
NO (Default Setting)
YES
GRATUITOUS ARP
Sets time interval for ARP transmission packets, where:
(0-100 minutes); Default is 0
NETWORK REPORT Print or view on screen the printers network information.