Appendix B – Ethernet Setup
47
Generic Network Configuration Page
NetBIOS (WINS)
Settings
NetBIOS Name
Is the name used to reference the printer instead of the IP address. A WINS or DNS
server is required for this capability.
Primary WINS Server
The IP address of the primary WINS Server.
Secondary WINS Server
The IP address of a secondary WINS Server.
TCP Print Services
TCP Port Number
Selects the Port to use for all network communications; the default is 9100.
LPD Print Services
Enable/Disable LPD Print
Services
Enables the Line Printer Daemon (LPD) Service.
Disables the Line Printer Daemon (LPD) Service
SNMP Services
Enable/Disable SNMP
Service
Allows management protocols, where:
Sends messages to SNMP-compliant devices.
Sends no messages.
SNMP Server Address
Is the Server address in standard octet format where SNMP traps will be sent when SNMP
service is installed on your receiver. When zeroed, no traps are sent.
SNMP Trap Address
Is the address in standard octet format where SNMP traps will be sent when SNMP
service is installed on your receiver. When zeroed, no traps are sent.
Telnet Services
Enable/Disable Telnet
Services
Allows Telnet protocol to transfer data, where:
Telnets to remote computers or server systems.
Disables Telnet.
FTP Services
Enable/Disable FTP
Services
Allows FTP protocol to transfer data, where:
Enables FTP
Disables FTP
HTTP (WWW) Services
Enable/Disable HTTP
(WWW) Services
Allows HTTP (WWW) protocol to transfer data, where:
Enables HTTP
Disables HTTP
Netcenter Services
Enable/Disable Netcenter
Services
Allows Netcenter Services to transfer data, where:
Enables Netcenter Services
Disables Netcenter Services
Gratuitous ARP
Gratuitous ARP (Minutes)
(Disabled=0)
Sets time interval for ARP transmission packets, where:
(0-2048 minutes); the default is Disabled.
