Datamax-ONeil RL3 User Manual Download Page 24

Page: 24 / 71

www.datamax-oneil.com

The NETira

™

CT Printer Configuration Utility (available for download at

www.datamax-oneil.com

) is a

Windows

-based configuration utility that allows the user to make changes to the existing printer setup

via a serial, USB or Wireless LAN connection.

NOTE: Information shown for NETira

™

CT reflects what is available on the current version of software

(v. 1.0.0.64). If you are using a version that is not the most current, some features or options may not

be available as shown.

Utility Features:



Allows Real-Time Control/Query of Printer Configuration



Define and Save Optimal Configurations for Applications



Saved Configurations can be Shared with other Printers and Sent via Email



Download Files, Formats and Fonts



Query Memory Modules



The NETira

™

CT Printer Configuration Utility is designed to communicate to the printer using the DPL

(or Auto) printer-language setting. This is the default setting for your printer when used for the first

time. If the printer has been set to any other input mode, the printer must be reset back to Auto or

DPL. To restore to your computer, use Tools>Set Input Mode function within NETira

™

CT.

1) Once you have downloaded the software, follow the instructions as prompted to install it on your PC. Once

installed, launch the NETira

™

CT Printer Configuration Utility.

2) Ensure the battery is installed and the printer is “ON.” Connect the host to the printer (see

Section 2.2 -

Interface Connections).

For Serial and Bluetooth

Connections:

a) Query the printer by using the “Auto-Detect” button.

This will connect to the printer and retrieve the

setting currently stored in the printer.

b) If the Auto-Detect is unsuccessful, close the “Open a

configuration file…” dialogue box and go to the

Settings dropdown menu and choose the RS-232

menu option. On this screen you can manually

select the port and its parameters.

c) Once complete, click “OK” and then click the “Query

Printer” button on toolbar. This will connect to the

printer and retrieve the setting currently stored in

the printer.

Summary of Contents for RL3








































































Search results

Summary of Contents for RL3

Reviews:

Related manuals for RL3

Brands by name

Popular brands

Datamax-ONeil RL3, User Manual

Search results

Summary of Contents for RL3

Reviews:

Related manuals for RL3

Brands by name

Popular brands