www.datamax-oneil.com
14
3.1.3 Buttons
Ready Mode
Button
Function
Short Press: Wakes the printer from sleep or off mode.
Short Press: Puts the printer into sleep mode.
Press and hold (~4 seconds) then release: Turns off the printer.
Press and hold (~10 seconds): Resets the printer.
Short Press: Feeds one label or a preset paper length
Press and hold for four (4) and seven (7) seconds and then release: Prints the Configuration
Label
Press and hold until printing starts [approximately eight (8) seconds]: Prints the
Configuration Label with additional information.
Enters the printer’s menu system.
Long Press (~4 seconds): Toggles the Wireless LAN/Bluetooth
®
radio on and off
Menu Mode
Button Menu Icon
Function
Returns to the previous menu level, at the top level it will exit the menu system.
Scrolls downward to the next available menu item or menu branch.
Exits the menu system and returns to “Ready Mode.”
OK
Selects the current highlighted item or menu branch.
3.1.4 Menu
Pressing the
button allows entry into the printer’s menu system. The menu system is informational
only; configuration changes to the printer cannot be made via the menu. The menu consists of three
branches; default values are show next to each item.
Serial
Baud Rate
9600 BPS
Data Bits
8
Parity
None
Stop Bits
1
Protocol
Hardware
MAC Address
xx:xx:xx:xx:xx:xx (varies for each printer; standard 6-octets of hexadecimal digits)
Calibrate Media The printer is factory-calibrated and should not need further calibration. However,
certain types of aftermarket paper/media will need to be calibrated. Depending on the
media type being used, this function senses the gaps between labels or the black
mark on the back of the media. Once the printer senses these locations, it can
accurately position the media for printing at the start of each label.
Once selected, the printer will feed media, pause ~20 seconds and then complete the
calibration.
Summary of Contents for RL3
Page 1: ...User Guide RL3 3e RL4 4e 110259 005 ...
Page 2: ......
Page 70: ...www datamax oneil com F 1 ...
Page 71: ......