Datamate M80 Series Manual Download Page 2 | Manualshive

Page: 2 / 15

Datamate M80 Series Manual Download Page 2

COMPONENT SPECIFICATION

C00525

C00525

C00525

C00525

- 2 -

1. DESCRIPTION OF CONNECTOR AND INTENDED APPLICATION

A range of 2mm pitch male and female rectangular, fully shrouded unsealed connectors with replaceable
contacts for interconnecting board to board, cable to board and cable to cable.  The range covers 2 to 50
ways, in various application methods.  Female connectors are available for crimp, vertical through-board and
surface mount termination.  Male connectors are available for crimp, vertical or horizontal (90°) through-
board and vertical surface-mount termination.  Overmoulding of cable assemblies is also available for crimp
versions.

The connectors are provided with a range of contact terminations (as shown in Appendix 1) that are gold or
gold/tin plated. The contact zone of a gold plated contact is hard acid gold of 98% purity.

The connector is intended for use as a low voltage connector in high packing density electronic equipment.
The connector is polarised to prevent mis-matching and can be produced with a latching feature (L-Tek) or in
a jackscrew (J-Tek) format, with or without board mounting.

L-Tek and J-Tek connectors are available with low-frequency (LF) contacts, while customised Mixed
Technology (Mix-Tek) connectors are also available with jackscrews, with a choice of power or coax contacts.

NOTE: Some connector styles are available manufactured and tested to BS9525 F0033. All other connectors in
the range are designed to the same specification.

2. MARKING OF THE CONNECTOR AND/OR PACKAGE [ORDER CODE]

The marking (order code) shall appear on the package and shall be as follows:

2.1. ORDER CODE:

M80

-

XXX

XX

XX

Series No.

Connector Style

Number of Ways

Contact Finish

For details of styles, as well as Mix-Tek and M83 markings and styles see the latest catalogue, or
individual drawings.

2.1.1. Number of ways:

SINGLE

ROW

(standard)

No. of

ways

2

3

4

5

6

7

17

22

Order

Code

02

03

04

05

06

07

17

22

DOUBLE

ROW

(standard)

No. of

ways

2+2

3+3

4+4

5+5

6+6

7+7

8+8

9+9

10+10 13+13 17+17 22+22

Order

Code

04

06

08

10

12

14

16

18

20

26

34

44

DOUBLE

ROW

(jackscrew)

No. of

ways

3+3

5+5

7+7

10+10

13+13

17+17

21+21

25+25

Order

Code

06

10

14

20

26

34

42

50

«
1
2
3
4
...
»

Summary of Contents for M80 Series
















Reviews:

No comments