INSTALLATION
27
2
Fix the STS400™ using 4 T-bolts and nuts (not supplied) to the supporting profile. When the
main plate slot is fully inserted onto the plate support assembly, the 4 mounting slots are
aligned with the supporting profile groove:
Also screw the locknut onto the plate support assembly and tighten it.
2.5.1 STS400™Plate
Support
Assembly
Positioning for Odd Number of
Readers
The STS400™ kits having an odd number of Matrix 410™ ATS readers are the -xx5 or -xx7
models.
When mounting one of these models the plate support assembly can’t be fixed exactly over
the center of the operating width because the main plate slot no longer corresponds to the
center of the FOV. A positional offset must be applied to center the FOV over the operating
width.
The following figure shows what happens when the plate support assembly is centered over
the operating width with an STS400™ model having an odd number of readers:
Fixing Slots to Frame
