INSTALLATION
25
2
2.5 STS400™ MAIN PLATE MOUNTING
Once the supporting profile has been positioned at the correct height we can proceed with
the STS400™ mechanical mounting.
STS400™ has been designed to be easily installed by one person using the T-bolt, special
plate supporting nut and locknut supplied in the kit:
Figure 1- STS400™ Plate Supporting Nut
The plate supporting nut has to be coupled to the frame with the M8 x 25 mm T-bolt:
Figure 2- STS400™ Plate Support Assembly
Mount the plate support assembly onto the bottom side of the STS400™ supporting frame.
When the T-bolt is inserted into the profile slot, position it directly over the center
1
of the
operating width and completely tighten the nut:
1
For STS400™ models having an even number of readers, the main plate slot, FOV and operating width are congruent. If the
STS400™ model has an odd number of readers then an offset must be applied from the center of the operating width. See
par. 2.5.1 for details.
