INSTALLATION
11
2
Finally the frame Height (H) can be calculated by the following formula:
H = Conveyor Wmin + Max Reading Di STS400 Width + Safe Length - Foot
Where:
Safe Length
is an extra length of 50 to 100 mm on the top of the frame, used for fine
adjustment at installation time (if needed);
Foot
is usually considered to be roughly 50 mm:
50 mm
2.1.4 Frame Bill Of Materials
We suggest using Bosch aluminum profiles; although any other brand can fully satisfy this
purpose.
The 45 x 45 mm profile section is the best compromise between frame stability and price.
The following bill of materials indicates a list of generic profiles: W, L and H.
Description Quantity
Profile W
3
Profile L
6
Profile H
4
Angular brackets
20
Note: It is suggested to double the angular brackets on both the ends of the profile
supporting the STS400™:
Angular
Brackets
Once the frame has been fully mounted, the STS400™ can be mechanically mounted.
