Instruction Manual
SG2 EXTENDED
21
3. MECHANICAL
MOUNTING
The emitting (TX) and receiving (RX) units must be installed with the relevant sensitive surfaces facing
each other.
The connectors must be positioned on the same side and the distance must be included within the
operating range of the model used (see chapter 10 “Technical data”).
The two units shall be positioned so as to be aligned and parallel as much as possible.
The next step is the fine alignment, as shown in chapter 5 “Alignment Procedure”.
Two types of brackets can be used to fix the two units:
Rotating brackets
Rotating fixing brackets are supplied with all SG2-E models (Fig.14).
They can be used separately from or together with the angled fixing brackets.
For fixing with rotating brackets, refer to Fig.14.
Fig. 14
