it is possible to select a fixed channel with a frequency different
from the default; please contact Datalogic Technical Support for
information about this feature.
For the 910 models, the radio range can change depending on the
Frequency Agility parameter value; in particular, at low speed, the
radio range is shorter when a fixed channel is programmed. See
the Radio Range values in
on page 314 of
Technical Specifications.
Enter/Exit Programming Mode
Product Reference Guide
237
The frequency agility features are not equally supported for all model
speeds. Please refer to the following table:
Table 26. Frequency Agility
Mode
Frequency hopping
Fixed Channel
different from default
433 MHz Model
Compatibile
No
No
Normal, low speed
Yes
Yes
Normal, intermediate speed
No
No
Normal, high speed
No
No
910 MHz Model
Normal, low speed
Yes
Yes
Normal, high speed
Yes
Yes
Summary of Contents for PowerScan 950X Series
