4-1
Datalogic Automation, Inc.
C H A P T E R 4
Processor I/O
This section discusses the MX-U Series Processor I/O scheme. Refer to this section for all specifications when wiring
your inputs and outputs into the Processor.
Note
: Your MX-U Series Processor does not provide a voltage source for
inputs and outputs – it must be provided by an external source. Refer to the
module tables below for more voltage requirement information.
Note
: The Trigger Signal and Strobe Output for MX-U Series cameras are
separate and not part of the MX-U Series Processor inputs and outputs. See
MX-U Series Cameras on page 3-1 for details.
Processor I/O Connection
To connect MX-U Series processor input and output signals use either cable 606-0675-xx (37 pin D-sub Male to Male
Cable) with terminal block 248-0110 or cable 431-0592-xx (37 pin D-sub Male to pigtail) with no terminal block.
Cable and terminal numbers are listed in the following table. Use shielded cable for all connections.
IMPORTANT: Do not connect or disconnect the cable while power is on.
Connector or terminal
number
Color Code
Signal Name
1
2
Black
White
Output Minus (Note 1)
Input 1- and Event 1-
3
4
Red
Green
Input 2- and Event 2-
Input 3-
5
6
Orange
Blue
Input 4-
Input 5-
7
8
White/Black
Red/Black
Input 6-
Input 7-
9
10
Green/Black
Orange/Black
Input 8-
Input 9-
11
12
Blue/Black
Black/White
Input 10-
Input 11-
13
14
Red/White
Green/White
Input 12-
Input 13-
15
16
Blue/White
Black/Red
Input 14-
Input 15-
17
18
White/Red
Orange/Red
Input 16-
Input Plus (Note 2)
19
Blue/Red
No Connection
Summary of Contents for MX-U100
