manualshive.com logo in svg

Datalogic MX-U Series, Product Manual

Share
Download
Datalogic MX-U Series Product Manual Download Page 37

MX-U Series Processor and Camera Guide

Camera Specifications

3-13

Datalogic Automation, Inc.

Camera Specifications

U1xx, U1xxC

All U1xx cameras have the following specifications. Model numbers that end in “C” are color cameras.

Capture Rate

The total processor-to-camera bandwidth is 600 Megapixels per second. Each connected camera shares this band-
width. For example, if two cameras are connected, each camera can use up to a maximum of 300 Megapixels per sec-
ond. For four cameras, each camera can use up to a maximum of 150 Megapixels per second. This means that both 
the camera resolution and the number of connected cameras can affect the frames per second (fps) value for each con-
nected camera.

U1xx Common Specifications

Lens Mount

C mount

Cabling

Camera cable provides trigger and strobe. USB cable provides power 
and transmits video

Operating Environment

Temperature: 0  to +50  C (+32  to 122  F)
Humidity: 0 to 80% (non-condensed)

Weight

<2.9 ounces (<80 g)

Software Version

Impact Software V11.5.0 or greater

Protection Class

IP30

Summary of Contents for MX-U Series

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands