manualshive.com logo in svg

Datalogic MX-U Series, Product Manual

Share
Download
Datalogic MX-U Series Product Manual Download Page 13

MX-U Series Processor and Camera Guide

Front Panel Connections

1-7

Datalogic Automation, Inc..

Front Panel Connections

This illustration shows the connections on the Processor’s front panel.

Service Personnel Only - Caution:

 Risk of explosion if battery is replaced by an incorrect type. Dispose of used 

batteries according to battery maker’s instructions.

Symbol

Function

A

Status Lights (see “Status Lights” on page 1-9)

B

Power Button: Press and release to turn on the 
unit. If the unit is on, press and release to shut 
down the OS and switch off the unit.
Press and hold to switch off without OS shut-
down. (Warning: Data could be lost.)

C

Reset Button: Resets the processor which trig-
gers a hardware and PCI reset. The unit is 
restarted. (Warning: Data could be lost.)

D

USB 2.0 Port for HASP key only. See “HASP 
Key” on page 2-7.

E

CFast Compact Flash Socket. 

Note

: A Com-

pact Flash card can be used for extended stor-
age. Do NOT insert or remove the card while 
the unit is powered on.

F

Battery Compartment

C

B

A

D

F

E

Summary of Contents for MX-U Series

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands