Datalogic matrix 450N, Reference Manual, Page: 69 / 175

INSTALLATION
57
3
3.4.4 EMK-600 Side Mount - Alternative
An alternative mounting solution is to use the BK-90-040 brackets (separate accessory).
Matrix 450Ns and EMK-600 Mirror alignment is obtained when the EMK is centered to the
frame profiles as shown in the figures below. These brackets also provide the freedom of
applying offsets to the mirror where necessary.
NOTE:
The BK-90-040 brackets are a separate accessory for alternative
mounting of the EMK-600 Deflection Mirror.
1. Mount and center the BK-90-040
brackets on the vertical profile.
2. Mount the mirror brackets to the
BK-90-040 brackets with one bolt
in the center position and one bolt
in the outer ring.
3. Rotate the mirror brackets so that
the 15° skew angle slot is aligned
with the profile channel, (see the
figure below).
4. Mount the Matrix 450N readers
through the center slots of the L-
brackets to the profile.
5. Move the mirror assembly to the
correct distance from the readers
according to your application.
6. Position the Matrix 450N readers
vertically to center them according
to your application drawings.
7. Tighten the bolts.
1
5
° S
ke
w