ON-BOARD ETHERNET CONNECTOR
PRODUCT REFERENCE GUIDE
167
* Output 1 and Output 2 are opto-coupled when using a CBX.
** Do not leave floating, see
RS422 Full Duplex Interface" on page 65
for connection
details.
In order to meet EMC requirements:
•
connect the reader chassis to the plant earth ground by means of a flat copper
braid shorter than 100 mm;
•
connect your cable shield to the locking ring nut of the connector.
ON-BOARD ETHERNET CONNECTOR
An M12 X-Coded female connector is provided for the on-board Ethernet connection.
This interface is IEEE 802.3 10 BaseT and IEEE 802.3u 100 BaseTx compliant.
Figure 2 - M12 X-Coded Female Ethernet Network Connector
1
DA+
Bidirectional data DA+
2
DA-
Bidirectional data DA-
3
DB+
Bidirectional data DB+
4
DB-
Bidirectional data DB-
5
DD+
Bidirectional data DD+
6
DD-
Bidirectional data DD-
7
DC-
Bidirectional data DC-
8
DC+
Bidirectional data DC+
ID-NET NETWORK TERMINATION
The network must be properly terminated by a 120 Ohm resistor at the first and last
reader of the network.
RS232
RS422 Full-Duplex
17
Main Interface
(SW Selectable)
TX
TX+
11
RX
RX+ **
12
-
TX-
10
-
*RX-
POWER, COM AND I/O CONNECTOR PINOUT
PIN
NAME
DESCRIPTION
ON-BOARD ETHERNET NETWORK CONNECTOR PINOUT
PIN
NAME
DESCRIPTION
Summary of Contents for Matrix 320
