RAPID CONFIGURATION
3
1
STEP 2
– MOUNT AND POSITION THE READER
1. To mount the Matrix 300N, use the mounting brackets to obtain the most suitable position
for the reader. The most common mounting configuration is shown in the figure below.
Figure 2
–Positioning with Mounting Bracket
2. When mounting the Matrix 300N take into consideration these three ideal label position
angles:
Pitch or Skew 10° to 20° and Tilt 0°
, although the reader can read a code at any tilt
angle provided the code fits into the Field Of View (FOV).
Figure 3
– Pitch, Tilt and Skew Angles
3. Refer to the reading diagrams in chp. 6 to determine the distance your reader should be
positioned at.
NOTE:
Rapid Configuration of the Matrix 300N reader can be made
either
through the X-PRESS
™ interface (steps 3-4) which requires no PC
connection,
or
by using the DL.CODE Setup Wizard (steps 5-6). Select the
procedure according to your needs.
Tilt
Skew
Pitch
Minimize
No Pitch, Tilt or Skew
Tilt
any angle
inside FOV
Skew
Assure at least 10°
FOV
H
FOV
V
Summary of Contents for Matrix 300N
Page 1: ...REFERENCE MANUAL Matrix 300N...
Page 179: ......