CBX ELECTRICAL CONNECTIONS
79
4
Output 3 is
not opto-isolated
but can be assigned to the same events. By default it is not
assigned to any event. The CBX500 must be used to connect this output.
NOTE:
For this output, set the Line Type configuration parameter according
to the hardware connection to the CBX: NPN, PNP or Push-Pull.
OUTPUT 3 CONNECTIONS USING MATRIX 300N POWER (CBX500 Only)
Figure 56 - Output 3 Using Matrix 300N Power
OUTPUT 3 CONNECTIONS USING EXTERNAL POWER (CBX500 Only)
Figure 57 - Output 3 Using External Power
CAUTION:
Do not connect to I3A or I34B signals, they are reserved.
Output
Signal
External Device
Ground Reference
Power to
Output Device
Output
Output Device
Signal
Reference
Output Device
Summary of Contents for Matrix 300N
Page 1: ...REFERENCE MANUAL Matrix 300N...
Page 179: ......