manualshive.com logo in svg

Datalogic Lynx 00N0LD-1N0-MEN0, User Manual, Page: 205 / 213

Share
Download
Datalogic Lynx 00N0LD-1N0-MEN0 User Manual Download Page 205

 

 

17 

 

2.8 

INDUSTRY CANADA COMPLIANCE 

 
Operation is subject to the following two conditions: (1) this device may not 
cause interference, and (2) this device must accept any interference, including 
interference that may cause undesired operation of the device. 
 
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil 
numérique de la classe B est conforme à la norme NMB-003 du Canada. 
 
This device and its antenna(s) must not be co-located or operating in 
conjunction with any other antenna or transmitter. 
 
The County Code Selection feature is disabled for products marketed in the 
US/Canada. 
 

IMPORTANT NOTE: 
IC Radiation Exposure Statement 

This EUT is compliant with SAR for general population/uncontrolled exposure 
limits in IC RSS-102 and had been tested in accordance with the measurement 
methods and procedures specified in IEEE 1528. This equipment should be 
installed and operated with minimum distance 1,5cm between the radiator & 
your body. 

Summary of Contents for Lynx 00N0LD-1N0-MEN0






















































































































































































































Reviews:

No comments