manualshive.com logo in svg

Datalogic Lynx 00N0LD-1N0-MEN0, User Manual, Page: 182 / 213

Share
Download
Datalogic Lynx 00N0LD-1N0-MEN0 User Manual Download Page 182

 

 

REFERENCES 

 
 

CONVENTIONS 

 
This manual uses the following conventions: 
 
“User” refers to anyone using an Lynx PDA. 
“PDA” and "Lynx" refer to Lynx PDA. 
“You” refers to the System Administrator or Technical Support person using this 
manual to install, configure, operate, maintain or troubleshoot an Lynx PDA. 
“Single Dock” refers to the Lynx Single Slot Dock. 
 
 

REFERENCE DOCUMENTATION 

 
For further information regarding Lynx refer to the SDK Help on-Line. 
 
 

SERVICES AND SUPPORT 

 
Datalogic provides several services as well as technical support through its website. 
Log on to 

www.adc.datalogic.com

 and click on the links indicated for further 

information including: 

- 

PRODUCTS

 

Search through the links to arrive at your product page where you can download 
specific 

Manuals

 and 

Software & Utilities

 

- 

SERVICES & SUPPORT

 

- 

Datalogic Services 

Warranty Extensions and Maintenance Agreements 

- 

Authorised Repair Centres

 

- 

CONTACT US

 

E-mail form and listing of Datalogic Subsidiaries 

 

Summary of Contents for Lynx 00N0LD-1N0-MEN0






















































































































































































































Reviews:

No comments