DATALOGIC JOYA™
32
1
3
3.7.2
Bluetooth® Manager Device Setup
In order to enable a Bluetooth
®
device for communication with the Datalogic
Joya™ you must perform the discovery procedure and enable the device as
follows:
1. Place
the
Bluetooth
®
device within the range of the Datalogic Joya™ (10
meters).
2.
From the “Control Panel” main window double tap on the “Bluetooth” applet
to open the Bluetooth
®
Manager Device window:
3.
Tap on the “Me” button to enter the related window; then, tap on the “ON”
button to activate the Bluetooth
®
module. The module activation may be
also performed by using the WIRELESS COMMUNICATION applet as
described in par. 3.6.3.
By tapping on the “HW Details” and “SW Details” buttons, information
about the mobile computer Bluetooth
®
hardware and software will be
displayed, while the “Enable Encryption” button starts encryption of the
Bluetooth
®
communication data. If tapping on the “Close” button the
Bluetooth
®
Manager Device window will be closed.
Summary of Contents for Joya R2U
Page 1: ...Datalogic JoyaTM R2U Ready to Use User s manual ...
Page 21: ...xxi ...
Page 22: ......
Page 41: ...USE AND FUNCTIONING 19 3 Registry Administration Window ...