Datalogic Joya R2U, User Manual

Page: 80 / 90

DATALOGIC JOYA™
58
1 5
5.6 CONFIGURATION
Joya Cradle Dispenser should be previously configured using an apposite
program: ABC.exe (see SDK Help for more information).
In a typical application there is the need to identify in a unique way each cradle
slot, in order to be able to perform selective operations. This requirement is
satisfied by each Joya Cradle Dispenser slot, by means of a set of four
parameters, called Config Parameters:
Slot ID: is a string of 2 bytes
Dispenser ID: is string of 1 byte
IP address: is a string of …bytes
Port ID: is a string of 2 bytes
Using this four byte strings it is possible to setup and identifiy each slot in a
unique way.
This Config Parateters are stored in the permanent memory location dedicated
of each slot. They can be configured making use of the ABC companion tool
and they can be read by a well inserted Joya.
5.7 USE AND FUNCTIONING
Insert a Joya inside a slot, Joya Cradle Dispenser will lock the Joya, when
electrical connectors are contacted.
To unlock Joya, approach a magnet to the sensitive area and extract the Joya.
All other commands could be developed by devolopers using Joya SDK.