Datalogic Heron HD3130, Product Reference Manual

Page: 171 / 298

Symbologies Enter/Exit Programming Mode
Product Reference Guide 161
Codabar Set Length 2
This feature specifies one of the bar code lengths for Codabar Length Control
on page 159 . Length 2 is the maximum label length if in Variable Length on
page 159 Mode, or the second fixed length if in Fixed Length on page 159
Mode. The length includes the bar code’s start, stop, check and data charac-
ters. The length must include at least one data character.
The length can be set from 3 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See "Set Length 2" on page 247 for
more detailed programming instructions.
Select Codabar Length 2 Setting
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters
$CCBL2
~