manualshive.com logo in svg

Datalogic Falcon Management Utility, User Manual, Page: 63 / 100

Share
Download
Datalogic Falcon Management Utility User Manual Download Page 63

Direct Connect

User’s Manual

 51

Explore Terminal

Use the Microsoft ActiveSync Explore option to view directory structure on 
direct connect terminals. Refer to the PRG for your terminal for instructions 
on establishing a direct connection between the terminal and PC.

Updating Terminals

Placing the terminal in the dock will trigger an update. ActiveSync will initiate 
when the unit is in place. Next, the 

FMU Update

 dialog will appear and will 

remain active while the unit remains in the dock. See ActiveSync instructions 
in the terminal’s PRG.

Enable FMU 
Client 

Select to enable the terminal to work with FMU.

Connection

Select 

Direct

. 

Group Name

Enter a group name, or leave blank to select the Default Group.

Update Time

This feature is disabled with Direct Connection. To enable, you must 
have an RF connection. See 

"RF Connection" on page 52

. 

On direct connect terminals, the FMU Explore option is not available. Use the 
Microsoft ActiveSync Explore option for access to the terminal's directory structure. 
See the documentation for ActiveSync for information on this feature.

Scheduled Update is not available on direct connect terminals. Updates are initiated 
each time the unit is docked and successfully connects to the host computer via 
ActiveSync.

CAUTION

Terminals should not be removed from the dock during the update process. Wait until 
you see the FMU Update and FMU FAST Update indicating ‘Idle.’

Summary of Contents for Falcon Management Utility





































































































Reviews:

No comments