manualshive.com logo in svg

Datalogic Falcon Management Utility, User Manual, Page: 28 / 100

Share
Download
Datalogic Falcon Management Utility User Manual Download Page 28

About FMU

16

Falcon

®

 Management Utility (FMU)

Figure 4. FMU Tree View 

Servers

A 

Server

 represents an FMU Server. Each server contains defined groups of ter-

minals. The server component also contains an 

Available Packages

 directory, 

which holds defined sets of files.

•

“Managing Servers” on page 25

 

•

“SNMP Interface” on page 59

•

“Adding and Assigning Packages” on page 31

Groups

Each 

Group

 represents a collection of specified terminals with common func-

tionality. Each group contains settings for configuration (hardware, network 
and symbology settings), assigned packages, and a list of assigned terminals. 
You can create any number of groups on a server. 

On installation of a server, a Default Group is created automatically. Expand 
the server component to view or change the settings for the Default Group.

See 

“Working with Groups” on page 29

. 

Configuration

Group 

Configuration

 allows you to view or change configuration items for the 

specified group. 

Server 

Assigned Pa

Group 

Terminal

Available Packages

Configuration 

FMU Start Page 

Summary of Contents for Falcon Management Utility





































































































Reviews:

No comments