manualshive.com logo in svg

Datalogic Falcon Management Utility, User Manual, Page: 29 / 100

Share
Download
Datalogic Falcon Management Utility User Manual Download Page 29

FMU Components

User’s Manual

 17

See 

“Group Configuration Settings” on page 29

.

Assigned Packages 

Assigned Packages

 provides a list of those packages assigned to the selected 

group. When selected, the list of packages for that group will display in the 
List View.

See

 

“Assigning a Package” on page 36

 for more information.

Terminal

Terminals

 appear within the group to which they are attached. Each terminal 

represents a physical Device as specified by the administrator and confirmed 
by the server. Any number of terminals can be added to a group. 

See

 

“Terminals” on page 36

 for more information.

Available Packages

Available Packages

 represent a set of files that can be assigned to groups for ter-

minal updates. Packages contain two types of files: basic files (drivers, configu-
ration, system software etc.) and firmware image files. Firmware image files are 
system updates to the terminal firmware itself, and the others are those files 
required to execute an application.

See Also

•

“Adding and Assigning Packages” on page 31

•

“Working with Files” on page 39

Summary of Contents for Falcon Management Utility





































































































Reviews:

No comments