Datalogic DS1500 Reference Manual Download Page 41

Page: 41 / 65

READING FEATURES

ACB Readable

ACB is disabled by default but can be enabled for the following code types:

•

Code 25 Interleaved

•

Code 128/EAN128

•

Code 39 Family

•

EAN/UPC (without ADD-Ons)

•

Codabar

•

Code 93

3.1.1

Important ACB Reading Conditions

•

Do not use ACB for omni-directional reading stations.

•

ACB can be activated for each symbology independently from the others.

•

ACB requires that the code be in movement with respect to the scanner.

•

ACB requires fixed length barcode reading.

•

The codes read with ACB enabled must pass in front of the scanner one at a

time.

Not valid for ACB

Valid for ACB

•

Code concatenation and ACB are not compatible and therefore cannot be

enabled simultaneously on the same code.

•

For correct operation, ACB requires at least 5 scans for each of the two

fragments

Summary of Contents for DS1500


































































Search results

Summary of Contents for DS1500

Reviews:

Related manuals for DS1500

Brands by name

Popular brands

Datalogic DS1500, Reference Manual

Search results

Summary of Contents for DS1500

Reviews:

Related manuals for DS1500

Brands by name

Popular brands